FAQ

Tejjy Inc. is headquartered at 1 Research Ct, Suite 335, Rockville, Maryland 20850, with an additional office at 66 W Flagler Street, Suite 900, Miami, Florida 33130.
From these strategic locations, we serve clients across the Washington DC, Maryland, and Virginia (DMV) region and extend our expertise nationwide to states including New York, New Jersey, Pennsylvania, California, Texas, and beyond.

We work with a diverse client base across multiple sectors in the USA of the AEC industry, including:

• Architects and Interior Designers, for BIM modeling, design visualization, and clash detection.
• General Contractors and Builders for coordinated shop drawings, project scheduling, and 4D BIM.
• Engineering Firms (MEP & Structural) for integrated multidisciplinary design.
• Real Estate Developers & Owners for feasibility studies, permit support, and facility management.
• Federal & Private Sector Clients specializing in Data Centers, infrastructure, healthcare, and government projects.

Getting started with Tejjy is simple:
Reach out to us via our Contact Page or call our team directly. We review your project requirements, design goals, schedule, and budget. Our experts prepare a detailed scope of work, timeline, and cost estimate. Once approved, we begin with schematic design, BIM setup, or permit expediting, depending on your needs.

Tejjy Inc. is a certified Minority Business Enterprise (MBE), Disadvantaged Business Enterprise (DBE), Women-Owned Small Business (WOSB), and SBA 8(a) Business Development Program participant. These certifications highlight our credibility and eligibility to deliver projects for federal, state, and local government agencies as well as private clients. They also demonstrate Tejjy’s commitment to diversity and compliance in the AEC industry.

Tejjy Inc. is a multidisciplinary design-build and BIM service provider delivering end-to-end solutions for the AEC industry across the USA. Our expertise spans entire building lifecycle.Our core services include:

• Architectural Design & Engineering
• BIM Services
• MEP Engineering
• 3D Laser Scanning & Reality Capture
• GIS Integrated Services
• Construction Management & Permit Expediting
• Facility Management & As-Built Modeling

Tejjy Inc. delivers BIM models at every Level of Development, from LOD 100 (conceptual design) to LOD 500 (as-built models), supporting clients throughout the design, construction, and facility management lifecycle.

• LOD 300–350: Detailed design & coordination models
• LOD 400: Fabrication models & shop drawings for contractors and manufacturers
• LOD 500: As-built BIM models integrated with facility management systems

By choosing Tejjy Inc., you can hire BIM experts, request project-ready deliverables ensuring tailored to your project needs.

Yes. Tejjy delivers COBie (Construction Operations Building Information Exchange) datasets, as-built BIM models, and digital twins as part of our handover package. These structured deliverables provide equipment data, asset tracking, and maintenance schedules for efficient facility management.

Our MEP deliverables include HVAC layouts, plumbing designs, electrical load analysis, fire protection drawings, and fabrication-ready shop drawings.
Our structural deliverables cover 3D models, load analysis reports, rebar/steel detailing, and code-compliant construction documentation.

We adapt to client standards and deliver files in multiple formats including Revit (.RVT), AutoCAD (.DWG/.DXF), Navisworks (.NWC/.NWD), IFC for open BIM collaboration, COBie spreadsheets (.XLSX), and PDFs. This ensures seamless integration with your existing workflows and platforms.

Yes. Tejjy develops a BIM Execution Plan (BEP) at the start of each project to establish standards, workflows, roles, and responsibilities. Our BEPs define modeling guidelines, file formats, LOD requirements, collaboration protocols, and QA/QC procedures, ensuring alignment among all stakeholders. This guarantees that the BIM process is well-coordinated, efficient, and compliant with client and industry standards.

Absolutely. Tejjy adapts to client-specific BIM standards, naming conventions, and workflows. We work seamlessly with industry platforms such as Autodesk Revit, AutoCAD, Navisworks, BIM 360, and IFC formats, delivering models and reports that integrate smoothly with your existing project environment. This flexibility ensures you get project-ready deliverables without disruption to your current systems.

Tejjy uses advanced tools like Navisworks, BIM 360, and Revit to perform clash detection across architectural, structural, and MEP models. Our team generates clash reports, issue logs, and resolution strategies, allowing stakeholders to detect conflicts early in the design stage. This process minimizes rework, saves construction costs, and ensures on-site efficiency.

Yes. Tejjy extends BIM beyond construction by delivering as-built models (LOD 500), COBie datasets, and digital twins. These deliverables integrate with facility management software to help owners and operators with asset tracking, preventive maintenance, and lifecycle cost management. This ensures buildings remain efficient, sustainable, and easy to maintain after project completion.

Tejjy’s 3D laser scanning captures measurements with millimeter-level accuracy, ensuring reliable data for architects, engineers, and contractors. This precision minimizes errors, reduces rework, and supports high-quality scan-to-BIM deliverables for design and construction projects.

Our deliverables include:

• Registered point clouds (RCS, E57, LAS formats)
• Scan-to-BIM models in Revit or IFC
• 2D drawings, floor plans, elevations, and sections
• As-built documentation for renovation or facility management
• Digital twins integrating scan data with BIM for lifecycle use

Yes. Tejjy specializes in scan-to-BIM services, where point cloud data is converted into intelligent 3D models. These models can be used for clash detection, coordination, construction planning, and facility management, providing a seamless bridge between existing conditions and new design or construction workflows.

Tejjy’s 3D laser scanning is ideal for data centers, healthcare facilities, commercial complexes, historic buildings, infrastructure projects, and industrial plants. It is especially valuable for renovations, retrofits, facility upgrades, and projects requiring accurate as-built documentation.

Tejjy uses 3D laser scanning and Geographic Information Systems (GIS) to deliver precise utility mapping solutions for Department of Transportation (DOT) projects. By capturing existing site conditions with high-resolution laser scans we create georeferenced models that provide detailed insight into both above-ground structures and underground utilities.
Our process enables DOT stakeholders to:

• Detect and map underground utilities with millimeter-level accuracy.
• Perform roadway and bridge inspections using reality capture data.
• Support right-of-way planning and highway expansions with geospatial intelligence.
• Improve infrastructure asset management and maintenance using GIS-integrated digital models.

MEP BIM is essential because it enables contractors to visualize, plan, and coordinate building systems before installation. By detecting clashes between ducts, pipes, conduits, and structural elements early, BIM eliminates costly rework and schedule delays. It also provides precise data for procurement, fabrication, and installation, ensuring that projects are delivered on time and within budget.

Yes. With fabrication-ready models (LOD 400), Tejjy provides shop drawings and spool sheets that your field teams can directly install from. This reduces on-site cutting, welding, and adjustments, allowing crews to work faster, safer, and with fewer errors. Prefabrication enabled by BIM also streamlines logistics, ensuring that systems arrive at the site ready for assembly.

Tejjy runs trade coordination meetings using federated BIM models in Navisworks. Contractors can see how HVAC, plumbing, fire protection, and electrical systems interact with structural and architectural components. With clash detection reports and issue logs, conflicts are resolved in the model, not on-site. This ensures smoother collaboration, fewer RFIs, and a more predictable schedule.

At closeout, Tejjy delivers as-built BIM models (LOD 500) containing accurate layouts and embedded asset data (equipment tags, serial numbers, O&M manuals). This creates a digital twin for the owner, making facility management easier. Contractors benefit from smoother handovers, fewer punch-list issues, and a strong record of completed work that supports warranties and long-term maintenance.

Tejjy ensures every project meets local, state, and federal building codes by integrating compliance checks from the very beginning of the design process. Our team prepares accurate construction documents and permit drawings, coordinates with regulatory authorities, and manages the permit expediting process. This approach guarantees that your project is code-compliant, permit-ready, and free from costly approval delays.

Yes. Tejjy specializes in sustainable architecture and green building solutions. We incorporate energy modeling, daylight analysis, and eco-friendly materials into our design process to enhance building performance and operational efficiency. Our team also delivers LEED-aligned and energy-efficient design strategies, helping clients reduce environmental impact, energy costs, and carbon footprint.

Absolutely. Our team creates 3D architectural models, photorealistic renderings, and virtual walkthroughs to help clients and stakeholders clearly visualize their projects before construction begins. These visual tools not only support faster design approvals but also enhance presentations for investors, marketing campaigns, and client buy-ins, ensuring alignment between design intent and expectations.

Tejjy uses BIM-enabled design workflows to seamlessly coordinate architectural layouts with structural, mechanical, electrical, and plumbing (MEP) systems. By integrating all disciplines into a single BIM model, we detect and resolve clashes early, improve constructability, and ensure that designs are practical, efficient, and aligned with real-world installation requirements. This process saves time, reduces costly rework, and delivers a better-performing building.

Our service pricing is tailored to each project’s scope, complexity, level of detail (LOD), and timeline. We consider factors such as:

• Size and type of the building (residential, commercial, data center, healthcare, etc.)
• Required deliverables (3D models, shop drawings, clash detection, as-builts, etc.)
• Coordination needs with other trades and stakeholders
• Project timeline and milestones

Absolutely. Tejjy provides affordable BIM solutions in Washington DC, Maryland, Virginia, and nationwide, scaling our services to meet the needs of small residential developments as well as large-scale commercial and federal projects.

The cost of BIM services in the Washington DC, Maryland, and Virginia region depends on project size, scope, and level of detail (LOD) required. At Tejjy Inc., we provide customized quotes tailored to commercial, residential, healthcare, and data center projects across the DMV area.

Tejjy provides end-to-end project management covering planning, scheduling, cost control, risk management, quality checks, stakeholder coordination, and final project delivery. Our services ensure projects are delivered on time, within budget, and to the highest standards.

We create a detailed project execution plan with clear milestones and monitor progress using digital tools like Procore, MS Project, and BIM 360. Regular progress reviews, early issue identification, and proactive risk management keep schedules on track.

Absolutely. We follow a structured change management process to evaluate revisions, assess their impact on cost and schedule, and update workflows accordingly. This ensures changes are well-documented and do not disrupt project flow.

Yes. Our role doesn’t end at delivery. We assist with project closeout, documentation, facility handover, and as-built BIM updates, ensuring a smooth transition to operations and maintenance.

Tejjy provides project management services in Washington DC, Maryland, Virginia, and across the USA, supporting both private and federal clients.

We maintain accuracy through a multi-step quality control process. Our team conducts regular model audits, clash detection, and cross-disciplinary coordination reviews using tools like Autodesk Revit, Navisworks, and BIM 360. Each deliverable goes through an internal review checklist to ensure it meets design intent, dimensional precision, and constructability.

Yes. All our BIM models follow recognized industry standards such as:

• LOD (Level of Development) 100–500 specifications
• NBIMS-US (National BIM Standards- United States)
• ISO 19650 BIM framework for information management
• COBie data compliance for facility management handover

This ensures interoperability, reliability, and compliance across all projects.