BIM Services in USA, Canada
BIM Services in USA, Canada
BIM Services in USA, Canada

Tag: Construction Projects

3d visualization companies near me
Construction Management

5 Building Inventions for the AEC Industry

5 Building Inventions for the AEC Industry

Innovative resources are an essential pre-requisite of the AEC industry. To get an edge over the competitors, Architectural Engineering & Construction professionals can implement the 5 Building Inventions for AEC Industry in their workflow:

·Kinetic Roads:

An Italian startup dealing with underground power explores the potential of kinetic energy in roadways. The technology called Lybra is a rubber paving like tyre, converting the kinetic energy created through moving vehicles into electrical energy. Established in association with a Polytechnic University in Milan, Lybra functions on the principle of a braking car, dispersing kinetic energy. This gathers and converts the energy into electricity before passing it to the electricity grid. Further, through enhancing road safety, a device can upgrade and endorse the sustainability of road traffic.

·Predictive Software:

The structural reliability of a building is good as its parts. The application helps to fit the building parts, along with the selection of materials & specific shapes for building performance under normal and extreme circumstances. Engineers integrate pieces into building designs while conforming to the increased demand for safety & government rules. Predictive software ensures that even the most inventive structures in civil engineering are safe & efficient, through simulating their behavior. An instance is on the structural integrity of the arch rotation brackets at the Wembley Stadium, using ANSYS – an Engineering Simulation & 3D Design software application that simulates the pressures on the brackets, holding & moving the distinct arches above the stadium.

·Modular Construction:

This is a popular development in the AEC sector, where a building is built off-site and planned to the same standards as conventional on-site construction. The innovative modular building technology restricts environmental disruption, delivering components as and when desired, and turning construction into a logistics workout. The modular technique also provides an advantage of sustainability from fewer vehicle movements to less waste. Through 70% of the construction produced as components, modular construction technique allows a move to “just in time” manufacturing & delivery.

·Cloud Collaboration:

Cloud collaboration is another technique used in the AEC sector that helps in remote data sharing on a construction site in real-time. The technique predominantly helps the engineers and architects to digitize the drawing review process on construction, allowing enhanced collaboration. The cloud collaboration emphasizes the installation of everything from steel beams to the light fixtures. Through cloud collaboration, technical snags can be detected that may occur during construction, by marking the PDFs and adding notes. The technique leads to about 60% of the cost-savings compared to conventional paper-based evaluation.

·Asset Mapping:

All developments in the AEC sector are not with new building materials or flashy technical tools. Asset mapping emphasizes operating apparatus, including heating & air conditioning as well as lighting & security systems. The technique helps to collect data from serial numbers and engineering notes from the time it was installed and by whom, integrating all data in one place. This facilitates in showing engineers in actual where the equipment should be installed on a map.Further, just the once the assets are linked to the real-time system using the Internet of Things (IoT), they can be supervised through the web, app, and other remote devices & systems. Asset mapping helps customers to create databases of asset performance, assisting practical building maintenance, and reducing building procurement as well as insurance costs.

To know more about Building Inventions for AEC Industry and adopt BIM technology in your construction workflow, contact the BIM Services Company Tejjy Inc. at 202-465-4830 or info@tejjy.com.

Tejjy Inc. BIM engineering services construction
Blog

Impact of BIM in Construction

Women Minority Certified BIM companies in usa

Do you want to adopt BIM in your commercial or residential construction workflow? Well, you must be looking for a BIM Service Company. But what are the decisions that you will take into considerations? It is significant for the contractors to take on a quick sketch and envisage the big picture while drawing a strategy. Using Building Information Modeling for a commercial project creates a spike in time and labor during the planning phases, though it saves time in work execution in the field and office.

Does BIM help the Design Engineers, Architects & Contractors?

BIM has become an essential item for the design engineers and architects. BIM Modeling & Design can detect and eliminate spatial conflicts before the onset of the construction process in the field. Nowadays, BIM companies has become a necessity for contractors doing business in the commercial field. The 3D or the third dimension in BIM adds to the depth of understanding for influencing significant financial decisions for the contractors. Mechanical contractors who have implemented BIM have a positive experience with this technology.

Benefits of BIM for Construction

The designers and architects are depending on Building Information Modeling for a good while, but BIM provides a greater payoff as it is used extensively within the AEC project team. General contractors are using BIM for streamlined coordination with the architects and the engineers. BIM facilitates general contractors through online-scheduling for winning complex contracts from clients, cost estimation, overcoming challenges when clients shift to new contract models such as public-private partnerships & integrated project delivery and also for improved profitability, saving time & cost.

BIM in construction not only helps to eliminate unforeseen clashes but allows sub-contractors to prefabricate parts of their work at their shop, under indoor conditions, to accelerate the process of work on the job site. It’s good to opt for a full MEP BIM coordination before a subcontractor starts working to realize the value to all participants.

Best BIM companies facilitates orderly installation, enforcing a level of contractor’s accountability. BIM Coordination provides the confidence to every project stakeholder about what should be intended, helping the team visualize the theories and designs without an excessive amount of resources with the right virtual mock-ups, trials and errors. As a result of which, stereotyped design change order owing to the existence of clashes can be avoided, leading to faster MEP coordinated completion of the project.

Best BIM in Construction Techniques For Adoption:

The scope of Building Information Modeling encompasses MEP Mechanical (HVAC), Plumbing, Electrical, Fire Protection, Concrete, Architectural & Structural disciplines, including condenser water pipe, AC, heat exchange equipment, and air distribution or duct work. Embracing BIM software technology can serve a contractor well by bringing the software modeling into the existing business models.

Even though the BIM startup process for a contractor entails a cost including the software training, personnel, and computers, the technology facilitates the AEC professionals in the long run. Owing to the involvement of so many trades in the coordination process, building information modeling helps in providing an intense focus to ensure that all add-ons and access meet the building codes and designs. Basic navigation can be executed through 3D Modeling software to evaluate things. Though BIM modelers bring years of experience to “fly-through” the model.

So, BIM can be employed not only for field coordination between trades but for piping prefabrication and modularization. NavisWorks, Revit MEP and BIM 360 Glue are some of the prime software applications for BIM clash coordination.

Consult an Expert BIM Modeling Company in the USA

To Implement BIM in your construction work process, get in touch with Tejjy Inc. – A Construction Management, Architectural & BIM Services Company in the USA at 202-465-4830 or info@tejjy.com.

Permit Expedition Service
Permit Expediter

Why the Need of Permit Expedition Service?

Renovating your building or planning a new construction? Don’t forget the Permit Expeditors. Experts in the profession of permit expedition advise the construction clients through the permitting process for keeping construction projects on schedule and within your budget adhering to the local building codes.

Why do you need an expedition service? Well, the reason is that the process of receiving a permit on a construction project is challenging in certain jurisdictions, or sometimes we surpass the local building approval needs.  Hence, AEC (Architecture, Engineering and Construction) industry experts recommend hiring a veteran permit expediting firm.

Let’s have a look at what should a permit expedition firm bring to the table?

  • Harnessing Local Expertise: An experienced permit expeditor in USA knows the permitting process of a region inside-out. With the help of local contacts, the expeditors find out the requisite by essential questions and investigations. Permit Expeditors are well versed with the local building codes and adhere to standards for implementation of the project. If you are selecting a permit expedition firm, background check for the accomplished projects in your area is a must. Consequently, this will help you to evaluate knowledge and experience of permit expediting company into the permit facilitation process of your building project.
  • Meticulous Screening of Construction Plans: Before submitting the construction documentation to jurisdiction for review, a permit expediter monitors the plan meticulously, paying heed to the details about the correct order and numbers of plan set, amount of fees, and signatures. As a result of which, the building expeditors can track any error and avoid needless comments from the Plan Reviewer, saving you time and money.
  • Communicating Project Updates: Permit Expeditors act as a single point of contact between you and the jurisdiction for communicating project updates and giving a response to inquiries. The experienced permit expediting companies work on multiple projects and can help you deal with any sort of renovation, tenant buildup permit Washington DC, electrical, plumbing, architectural drafting or new construction projects by providing updates every week.
 Permit Expedition Service

Tejjy Inc. is permit expedition service and engineering firm serving in Washington DC, USA. Expert permit facilitators of this construction management firm are well versed professionally to let you receive permit without any stress in no time and cost-efficiently complete construction projects.

Permit expedition service of Tejjy Inc. are facilitating architects, retailers, coordinators, contractors and all construction professionals involved in the project management team to give attention to every aspect of the project and maintain communication among the jurisdiction, consultants and clients.

Call 202-465-4830 or write at info@tejjy.com for consultation on permit expedition.

Tejjy INC