Tag: 3D BIM Modeling

What does the future hold for 3d Laser Scanning?
Revit BIM Modeling Services

What does the future hold for 3d Laser Scanning?

Laser scanning is becoming more powerful,  useful, and affordable, impacting several industries. The technique of laser scans to BIM technology follows a trajectory to compute and it is smaller, cheaper and easy to use. Now, how the laser scanners are advancing in recent times? What are the areas of future investment? What’s the ways the 3D laser scan to BIM technology will change? How the changes could be used for future benefits?  Scan to BIM process is mainly used by the surveyors. Point cloud scan to BIM data have become significantly vital to the construction industry.

Let’s take a look at how the scan to BIM technology will be used and how the laser scan to BIM services would be adopted for the future.

How the scan to BIM technology will be used?

  • LiDAR or mobile LiDAR – LiDAR stands for Light Detection and Ranging and it constitutes to be the leading technique behind laser scanning. The technique of scan to bim services works through dominant laser pulses moving towards the target and gathering backscattering signal. They are current mainstream, using a set of spectral wavelengths for collecting data. Mobile scanning also uses the same technique effectively and it is poised to change the way of scanning.
  • SLAM or Simultaneous Localisation & Mapping – SLAM constitutes the algorithmic process of creating a map of a strange setup while circumnavigating that environment using a map. It’s critical for developing autonomous robotics to make mobile scanning simple and easy. SLAM scanners establish a wide array of sensor types such as audio rangefinders, visual cameras and inertial sensors. Nevertheless, LiDAR and laser scanners are crucial for producing accurate SLAM scans, and would enhance deployment in near future. The  scan to bim process allows surveyors walk through a site and collect significant data. This is possible with a range of technologies like sensors, LiDAR Odometry and mapping in real time.
  • Drones – Currently, drones are gaining significance in point cloud scan to bim. These unmanned aerial systems  are often used  with SLAM scanners, together with conventional LiDAR and GPS improved LiDAR. Mapping and surveying through drones deliver an easy-to-deploy podium for capturing aerial views. At present, some factors are restricting the use of drones about the time of operation and the development of regulations in several countries.  Drones help to produce valuable 3d laser scan to BIM process, which is essential for various engineering projects and undertaking scientific tasks

How  laser scan to bim services  would be adopted for the future?

Point clouds would be spreading into the clouds. BIM companies in USA seek data availability, accuracy, density, and forecast 3D point clouds for growing rapidly within the subsequent years. The enhancing usage of point cloud scan to bim would see an explosion to manage data in the cloud, cloud-based data processing and direct upload of point cloud data to cloud services.

The cloud would bring diverse advantages to point clouds. The conventional benefit hovers around the storage and distribution of information and models. Instead of sending output to relevant stakeholders, access could be provided and all relevant parties could view the files. Further, cloud storage could be dynamically scaled, providing an inexpensive method of enhancing capacity for large projects. This is similar to how Bim companies in USA improves collaboration in construction.

Benefits of point cloud scan to bim process are strikingly changing this reality. Robust, vector-based and multi-stage processing allows automated processing. The perfect 3d laser scan to BIM software allows you to take the benefits of computing by registering multiple scans at the same time using manifold processors. However, the cloud provides limitless scalability, delivering faster registration and robust outcomes.

BIM Companies in USA modeling the future of construction

Laser scan to bim process is maturing for easy accessibility and capturing new methods to become viable. Driven by smaller and cheaper scanners and well equipped with improvements in point cloud registration, laser scan to bim technology is becoming an integrated part of several architectural, engineering and construction projects. So, the AEC professionals need to look at the potentials of point cloud scan to bim. To implement the technique, opt for Tejjy Inc. – one of the top design build firms and BIM service providers in USA and get an edge over  your competitors. Contact the BIM automation company at 202-465-4830 or info@tejjy.com and get improved BIM execution planning with laser scan to BIM.

Residential Architectural firm in DC, MD, VA, Baltimore
3D Modeling Services

The Journey of Architectural BIM Services with Building Analysis

Architectural BIM Services

Are you concerned about the environmental impact of your construction on other buildings? Worried about the fact how a building will cast a shadow on an adjacent area? Concerned about whether the brick façade will match with other construction in your neighborhood? 

Anxious about the fact whether your lobby area will look congested? Whether the light monitor will provide sufficient daylight to the passage? 

All such questions can be answered by 3D visualization services in construction through architectural BIM modeling services in by best BIM companies.

No matter whether you are adopting BIM services in US or UK or anywhere in the world. The architectural BIM engineering companies inject a new life to your building structure with best design build service. Holding strong to cost and time estimation BIM services like 3D modeling, 4D scheduling, 5D cost estimation the precise construction cost and material cost could be deduced.

What is the need of Architectural BIM Engineering Services ?

  • Experienced architectural BIM service provider in USA provide customized BIM modeling services as per client requirement by directly communicating with their team members. 
  • The BIM engineers support the architects in reviewing the model. 
  • The architectural clients obtain high quality design build services at a competitive rate.
  • Successful implementation of BIM modeling services in commercial projects facilitates the construction of high rise buildings, healthcare projects, hotels & convention centers, educational institutes, and large commercial projects.

Top Benefits of Architectural 3D Modeling include:

  • Risk Mitigation: 

As 3D BIM performs clash coordination to support highly efficient mep BIM services the construction risk is reduced with early clash detection.

  • Decreased change orders:

 The digitized platform of BIM services automatically manages changes with proper updating eliminating inconsistencies.

  • Optimization of Schedule: 

4D Scheduling helps managing activities online with continuous tracking the action on roles and responsibilities of the team employed on construction project. 4D with AI reduces risk to minimalistic levels in an architectural engineering project.

  • Improving Design Quality:

The added perspective of architect, designer, MEP engineers, BIM engineers, contractor, sub-contractor elevates the design efficacy. 3D visualization and animation walkthrough enables any changes before the beginning of the project. Customized Revit families help you have innovative design services.

  • Competent Project Handover:

Top BIM companies in world adopt BIM services from 3D model to scheduling to quantity takeoff. As a best BIM service provider the journey doesn’t end with completion of construction project it still continues. The reality is BIM through facilities management helps in maintenance and operation of commercial construction projects. It would not be wrong in saying BIM has evolved itself as a support system to architectural engineering companies.

What are the Top BIM Modeling Services during the Design Process?

The key architectural 3D BIM services provided by BIM service providers in the USA encompass Schematic Design, Design Development, and Construction Documentation.

  • Schematic Design encompasses exploration of the exterior view and interior view of the building through 3D BIM modeling services, BIM 3D Visualization, and the creation of intelligent libraries for building components in numerous styles and specifications. Schematic Design involves the first phase of the design, where an architect consults with the client for determining the project requirements and objectives. Schematic BIM Design often generates rough drawings of a construction site plan, floor plans, elevations, and descriptive sketches or computer renderings. The stage of Design is associated with LOD 200 Revit BIM Model.
  • Detailed Design Development Services through Building Information Modeling involve the Elevations, Floor plans, Building schemes, and Information on material provisions, quantities, time schedules as well as costs. In the Design Development Phase, the schematic plans and elevations get reviewed, revised, and extended for incorporating all the specifications essential for construction. All the project components are considered to the minutest details including the Lighting & technology designs. This is associated with the LOD 300 Revit BIM Model.
  • Construction Documentation Services encompass a precise set of drawings integrating apt data regarding every step of the construction process and all specifications necessary for creating an all-inclusive estimate and eventually make the final construction of the project. Usually, the BIM construction documentation services take into consideration Building Sections, Staircase, and Vertical Circulation details as well as other Construction details. It corresponds to LOD 400 Revit Model.

How Revit Building Information Modeling Services Cater to BIM Architecture Firms in the USA?

Revit BIM Services in the USA facilitates several BIM architectural companies in the USA for experiencing building design before it becomes real. The Revit software platform constitutes to be a quantifiable Building Information Modeling platform, providing the ability to visualize building performance accurately. Be it for architectural BIM services or structural BIM services, Revit 3D Modeling enables architects, engineers, and other construction professionals to get the one-stop solution regarding BIM outsourcing services and deliver the most befitting resolution competently to clients.  

Be it the creation of 3D BIM Models from the sketch, CAD drawings, construction documentation, BIM clash detection & Revit family content creation, Revit BIM Services in the USA assure architectural clients the delivery of the entire construction process from the stage of conceptual or schematic design to the construction documentation stage, facilitating complete BIM Modeling.

Why Revit 3D Modeling Services preferred by US clients?

Architectural Revit BIM modeling service is most preferred by clients in the USA as it delivers accurate and updated information regarding the design scope, costs, quantities, and other properties of the building modules. The architectural BIM modeling services extend to maintain and manage all design modifications and project updates. Hence, the project architect can opt for improved decision making, reducing design errors. Consequently, coordination of construction drawings and other documents gets improved through providing seamless integration amongst design, analysis, construction, and engineering operations for the facility lifecycle. Thus, through architectural BIM services, you can get a shared information resource, making the building process responsive to all project stakeholders, facilitating the construction workflow, and improving project efficiency and profitability.

Where to find one of the best Architectural BIM Services Companies in the USA?

Want to outsource BIM Service in DC or BIM Design in MD, talk to the BIM Engineers of Tejjy Inc. and acquire the flawless architectural solution for your project by calling at 202-465-4830 or info@tejjy.com. Tejjy Inc. provides a wide array of architectural BIM Modeling services in DC, MD, VA & Baltimore areas enabling clients to make improved project visualization at the pre-construction stage.

BIM Facility management | 7d bim in usa
Construction Management

What is Facility Management?

 

Asset and BIM Facility Management Company in US Tejjy

Facility Management (FM) is a business, encompassing manifold disciplines to safeguard functionality, comfort, safety, and efficacy of the built set-up by integrating people, place, process & technology. The scope of facilities management is fairly large. While a Sales Manager is accountable for dealing with the performance of sales people, the purpose of BIM Facility Management services extends beyond managing the facilities.

Now, what’s the significance of BIM facility management? To understand the activity of the facility managers, their responsibilities, and their influence on a company, it’s good to analyze their scope of work. The four pillars of facilities management include human resources, procedures, the building, and technology.

Facility managers are also accountable for keeping the facilities moving along smoothly. The job entails day-to-day oversight with the capacity to implement the varying needs of the facility. However, FMs need the farsightedness to involve in facility planning for keeping pace with the demands of the workplace. A forward-looking mindset helps the facility managers to maximize space, enhance the workplace experience, and keep up reduced low. This starts by discerning current trends and identifying the essential workplace requirements.

Who is the Facility Manager?

A facilities manager is responsible for ensuring that the constructions and their services match the requirements of the people working with them. The experienced BIM companies near me facilitates BIM Facility Management services. These BIM companies are responsible for cleaning, security and parking, making the surrounding environment an apt condition to work. Facilities managers are responsible for the security, maintenance, and services of work facilities for ensuring that they meet the requirements of the organization and its work forces. Further, facilities managers look after all services that facilitate business or other organizations do the work. They observe, understand, and act on crucial areas for planning future developments. The objective is to optimize the diverse façades of the business by improving one thing and touching all facilities.

How Facility Management is Creating Efficiency?

Understanding the significance of facility planning entails looking at competence. It depends on the way how effectively you can use the space available to you. Are you catering to employee efficiency? Where does the waste exist in your workstation and what can you do for minimizing it?

The objective of facility planning is to make out opportunities for efficiency and anticipate them. Easing inadequacies within the workplace has rippling effects throughout the entire business.

• Identifying workspace prevents congestion and the dip in efficiency coming with it. This also serves as the basis for a cost-saving hot desk or remote work plan.

• Reviewing vendor contracts enable Facilities Managers to move to an integrated BIM Facility Management services method, consolidating costs, and reshuffling the property management facet of facilities oversight.

• Top BIM modeling companies in USA evaluate tenancy data from an office IoT provides facility managers the required information to anticipate space requirements for a growing workforce, supporting improved planning for expansion of costs & logistics.

Responsibility of Facility Manager:

The four main functions of Facilities Management include:

  1. Supporting People
  2. Establishing Procedures
  3. Maintaining & Improving Facilities
  4. Integrating Technologies

  1. Supporting People:  

Being top BIM service provider  the key objective of a facility manager is to create an accommodating work environment for the employees serving extensive goals, including attracting & retaining talent, improving efficiency, and producing a progressive workplace culture. Facility managers support employees in several ways such as:

  • Synchronizing desk arrangements
  • Supervising employee directories
  • Enabling space utilization
  • Managing emergency planning

Facility managers serve as a bond within the workplace and the employees. Each time problems of accommodation, safety, or comfort crop up, the facility managers help to resolve them. Facility managers are also accountable for providing vital planning data and determining the long-term tactic for optimizing workplaces. Their daily communication with the workstation throws light on accurate costs, providing competitive benefits to the employees.

  • Establishing Procedures:

What are the roles of BIM facility management without a method of governing them? Establishing procedure fetches order to the workplace. Order produces a method of expectations, positively impacting the utilization of the workplace. The workstation operates on various practices, including:

  • Submitting a Request of Work Order
  • Space Reservation within the facility
  • Checking Guests & Visitors
  • Preparing an Emergency Action Plan

  • Maintaining & Improving Facilities

Best facility and operation management BIM companies is mostly rooted in the maintenance and improvement of the facilities. It encompasses future planning, asset management, and undertaking a wide array of responsibilities including:

  • Detecting & Maintaining Vendor Contracts
  • Repairing, Maintenance & Building Improvement
  • Cleaning & Decoration of the Work Place
  • On-site & off-site Property Management

  • Integrating Technologies

A competent facility manager should understand the right usage of technology. Workplace management systems collect data, driving vital decisions about executing the business, and shaping the workplace. Detecting and adopting the right technology is one of the prime responsibilities of facility managers. They should know the use and the process of leveraging technology like:

  • Exploring IoT strategies as per the data collection requirement
  • Integrating IoT devices into day-to-day facilities procedures
  • Assessing the cost, ROI, and benefit of smart technologies
  • Using aggregated data to comprehend the workplace in an improved manner

How to become a Facility Manager?

To become a facility manager, one has to acquire certifications with a blend of education and experience. The CFM (Certified Facility Manager) certification has certain eligibility requirements like a Master’s or Bachelor’s degree in Facility Management.

Relationship between BIM & Facility Management:

BIM (Building Information Modeling) is beneficial in existing facilities, which are not created using an integrated, 3D digital model. Through the usage of innovative design plans and laser scanning technology, the Building Information Model can be produced from a prevailing facility. The system can then be utilized for monitoring & standardizing systems and recommending retrofit opportunities for operational efficacy & cost-savings. All ongoing benefits of a BIM platform are accessible to the building owners and managers. The ability to trace contracts & performance over the extended period of the facility is priceless. It becomes easier to analyze the contracts and ensure fulfillment through an integrated BIM Model.

BIM is characteristically used in association with cloud architecture. This method allows contractors and participants to access and review building information remotely, increasing the collaborative potential and productivity gains.

Role of BIM in Facilities Management:

While the value proposition throughout the initial stages of design & construction is noteworthy and can be gauged directly in ROI, other benefits of this methodology on the facility’s usefulness include:

  • Improvement in the facility designs for occupants’ comfort & safety for office or residential facilities through:
  • Creation of security concerns & evacuation plans in an intuitive way to promote the health & well-being of the occupants.
  • Detection of radio frequency interrogators & smart planning negating security flaws on a facility with the low negative impact on comfort & ease of access for the inhabitants.
  • Improvement in manufacturing plants, through enhanced efficiency through:
  • 3D BIM Modeling & Control of the manufacturing process by designing the most efficient assembly line possible
  • Accomplishing product modeling, analyzing off-site processes, and testing digitally before implementation, with huge potential savings.

BIM for Smart Buildings:

  • BIM (Building Information Modeling) is efficiently used in tandem with the smart building process, involving the dynamic integration of building & information systems. This helps in automatic clash detection, responding to environmental changes through using wireless sensors entrenched in the exterior & interior surfaces.
  • Sensors can identify and respond to daylight levels, outdoor temperatures, systems performance & conceivable deterioration, and mechanically correct window tint, blind positioning, and HVAC settings along with alert facilities workforces to any incongruities.
  • The systems can anticipate conditions to respond on time. Through synchronizing integrated intelligent building systems with BIM, you can get a complete depiction of a building’s status in real-time.

Using best BIM companies for smart building technology helps civil engineers to provide cost-savings through the building’s life cycle for making it a pleasant & desirable place to live. Building planning & construction in a multi-disciplinary industry has integrated information & collaborative communication between contractors & owners. 3D digital model stored in the cloud resolves all the problems, paving the way for increased usage in the future.

To know more about BIM facility management services, call the BIM Engineers of Tejjy Inc. at 202-465-4830 or info@tejjy.com to discuss your project ideas.

To Know more about us:

ArchiCAD or Revit | Tejjy Inc.
3D Modeling Services, Architectural Services, BIM Facility Management, BIM Service, Blog, Construction Management, Construction Project Management Services

Which BIM Software is better – ArchiCAD or Revit?

BIM Software ArchiCAD or Revit in DC, MD, Baltimore

Many consider Building Information Modeling (BIM) technology to be another CAD (Computer-Aided Design) program. However, in reality, the technique goes beyond that. 

So What is BIM? 

BIM Building Information Modeling constitutes to be an intelligent model-based procedure for providing an insight to plan, design, build & manage buildings and infrastructure. BIM Engineering Software produces more than just digital 2D or 3D models, using objects having intelligence, geometry, and data. It is often defined by industry experts as a process of managing complexity and improving performance in construction projects. 

Who Created Revit Software?

Revit software application created by the American multinational software corporation, Autodesk and ArchiCAD invented by the Hungarian company Graphisoft are the two key market players.  Comparing ArchiCAD & Revit helps the architects, owners, and contractors for making the right decision about software implementation. 

What is ArchiCAD?

ArchiCAD constitutes to be the first BIM engineering software application made in 1984. The software provides a set of tools for design & engineering. In contrast, Revit is a 4D BIM tool that facilitates the planning of all aspects of a building project, from design to construction and beyond. Since 2002, the software is used by architects, builders, engineers, project managers & more. 

What is the Best BIM software – ArchiCAD or Revit Architecture?

ArchiCAD & Revit are both advanced & sophisticated BIM software applications with their metrics. Here are the comparisons of ArchiCAD & Revit:

Benefits of Revit BIM Software:

  • Revit BIM software application facilitates architects & engineers for building designs and its components in 3D, annotating the BIM model with 2D drafting components and gaining access to building information from the model database. 
  • Revit has 4D BIM capability for planning & tracking several stages in the building’s lifecycle, from concept, construction to demolition.
  • Revit has a huge demand in the market with a strong development platform, extensively supported by courses, tutorials & improved collaboration. It is exclusively meant for architecture, structure as well as MEP.

Limitation of Revit BIM Software:

  • Revit does not operate on OSX. It requires the fastest CPU and file size to run.

Benefits of ArchiCAD:

  • ArchiCAD is a 3D BIM Modeling & CAD application, which helps to draw, model & display building designs simply & quickly. 
  • Being object-oriented ArchiCAD helps to generate & amend 3D objects & create 2D architectural drawings & 3D models of the buildings.
  • ArchiCAD is fully multi-threaded and also runs on OSX, which has a friendlier user interface, oriented towards architects. 
  • ArchiCAD has well-developed support for IFC, competent drafting, layout approach, and decent rendering. 
  • The software application also has flexibility & proficient parametric objects.

Limitation of ArchiCAD:

  • Custom objects need GDL scripting
  • Old workarounds are never solved
  • Some extensions are not properly updated & less-used API

Understanding the Features of Revit & ArchiCAD Software Applications

User Interface:

  • The user interface of ArchiCAD constitutes to be the first thing why users are praising for. It is clean & sleek with an easier learning curve for the designers. Though the interface can be customized in several ways, it has rather less flexibility than Revit. 
  • Revit constitutes to be a highly customizable interface, supporting manifold approaches for software usage. It is a bit complicated, due to its medium learning curve but Revit provides enhanced flexibility to the designers and architects. So, Revit Architecture is worth the investment for the architects.

Conceptual Design:

In respect of Conceptual design, ArchiCAD is a rather user-friendly, facilitating push and pull modeling, instant & customized geometry, and smart multiple extruding. Similarly, Revit features a conceptual design, providing flexibility in the initial phases of a project, allowing the creation of geometry, which can later be integrated into the BIM project.

Visualization:

Revit has a wide array of views to design approaches, like wire frame & transparent surface. Every view can be operated & organized in a specific project and can be allotted to the overall view or specific to a category. ArchiCAD has similar visual flairs as Revit but doesn’t have the capability for applying views to detailed components.

Rendering:

ArchiCAD & Revit have a huge suite of tools for rendering, capable of producing photorealist images of the project interior and exteriors. The Ray Trace is a photo-realistic rendering method that lets panning & zooming with the Revit model. Through this visual panache, rendering begins at a lower resolution, but enhances its fidelity quickly. As a result of which, the AEC professionals can set photographic exposure, lightening as well as the background. ArchiCAD has Cine Render, a similar tool to Ray Trace, providing the opportunity to modify the shadow, texture, light and brightness.

Interoperability:

Both software applications can import and export IFC files. Further, they can import and export all common file types, such as the 3D models, 2D drawings, and various other types of CAD files.

Pricing:

The cost of Revit 2018 is about $3091 per year. ArchiCAD 21 is a bit cheaper, though, it requires several add-ons to add manually for achieving the same functionality as Revit. 

Experts’ Opinion on ArchiCad vs. Revit

Those who prefer ArchiCAD:

  • Many architects prefer ArchiCAD as opposed to Revit as through ArchiCAD, they can express ideas better and can manage all parameters.
  • ArchiCAD provides several tools that are beneficial for presenting and developing the design. As a result, the graphical presentation of the models, projects, and documentation are at an excellent level. 

Those who worth Revit Architecture:

  • Revit is a valuable software application, made for architecture, providing every single tool to design a good building. 
  • The software application is precise, providing a clean and accurate drawing. 

The crux of the Matter

Both BIM software tools are dynamic. Dedicated users of each think that their preference is better. They undertake most of both software applications for different strengths and weaknesses. So, which one will you use? Which BIM Software you think is better, ArchiCAD or Revit ? Is Revit architecture worth the investment for your construction project? Whether BIM engineers & architects will be benefited by using Revit and ArchiCAD ? Talk to the BIM Modelers of Tejjy Inc. at 202-465-4830 or info@tejjy.com.

Tejjy Best BIM Modeling Companies usa
3D Modeling Services

Benefits of 2D | 3D | 4D | 5D | 6D BIM Modeling – When to Opt Which BIM Services?

Best BIM Modeling Companies in usa -3D BIM | 4D Scheduling |Quantity Takeoff

Today, BIM revolution is quite popular in the construction industry. Nevertheless, Which of 2D, 3D, 4D, 5D & 6D BIM dimensions are well-suitable is the most difficult question for some people to understand. BIM (Building Information Modeling) dimensions and BIM LOD(level of detailing) denote a specific way in which diverse data are related to an information model for accurate excecution in project life cycle.

What is BIM Building Information Modeling?

This digitized technique sounds exciting . But , dimensions and LOD have nothing to do with space, time, black holes, or anything out of an ‘Interstellar’ movie. To be more precise, the dimensions deal with the levels of information in a given BIM data. Building Information Modeling is a digitized model based process with tools, techniques for effective planning , designing, management and execution in project life cycle. BIM has the ability to facilitate architecture, engineering and construction sector. 

Are BIM dimensions different from BIM LOD ? Another, query that boggles your mind. Definitely they are different. Dimensions in 3D Model add different parameters like cost, time, visualization whereas Level of Detailing defines the level of refinement in 3D geometry model service. Leveling up on the dimensions provides architecture, engineering and construction professionals an improved understanding of the construction model, providing information and details such as how, when, and for how much.

Are 2D Draftings | Drawings helpful?

The technique starts with a 2D CAD design drawings dimension, where the models require an X-axis & Y-axis, which gets created through hand or CAD drawings. CAD (Computer-Aided Design drafting) softwares like AutoCAD, AutoCAD LT by Autodesk are adopted for technical design drawings. Design drafters generate floor plans, permit drawings, landscaping, building inspection plans through these technical drawings. The journey from 2D to BIM enables better visualization, walkthrough improving the building designs 

3D BIM Modeling

3rd dimension of Building Information Modeling is a shared informational model, which adds an added “Z-axis” to the existing X & Y-axis. BIM tools and techniques enable creation of  information model for entire project life cycle.is the most popular form of BIM or the concept that most people are acquainted with. It is the technique of producing graphical & non-graphical information and sharing that in the common data environment, broadly called CDE. 3D facilitates AEC stakeholders to manage their multidisciplinary collaboration effectively in modeling & evaluating complex structural problems. Moreover, they can collect accurate data throughout the construction project life cycle and store that in the Building Information Model, adding new values to predictive models and resolving issues proactively.

Why Should You Opt 4D BIM?

The level of 4D BIM is a 3D model with the element of time added to it. The fourth dimension of Building Information Modeling includes additional information to the project and information model in the form of data scheduling. The data gets added to the modules made by the AEC professionals as the project progresses.

Choosing  4D dimensional BIM leads to improved clash detection even referred as clash free construction scheduling. This eliminates the intricacies of the changes occurring throughout the building project . The building information or information model with 4D BIM can be used for getting accurate program visualizations, demonstrating the sequential development of the project. 4D Building Information Modeling provides the right tactics for construction management with optimal resource utilization. The envisaging site status information, change impacts, and backing up communication in numerous situations like informing site staff or notifying them about potential threats.

Reason To Consider 5D BIM Modeling

5D Building Information Modeling adopts a simple 3D geometry and applies the element of cost to the project. This enables better design estimation of cost and materials with BOQ/BOM(Bills of Quantities/Bills of Material). A faster and accurate Quantity takeoff is possible even with any level of design modifications.

Owing to the involvement of the surveyors and estimators from the beginning of the project, BIM modelers along with the design teams have consistent information due to the possibility of cloud-computing. Point-cloud computing even make the conversion to BIM easy .

Associating 5D with a conventional method, where the cost reports aren’t updated frequently and only for a few times during the early stages of the project, can lead to several modifications in designs and material requirements. Implementing Building Information Modeling , the cost estimators can work precisely with cost and time factor in a multi-discplinary platform with design collaboration.

BIM Modeling Companies in USA

Who needs 6D BIM?

Looking for operation and facilities maintenance with asset and facility management cost? The 6D BIM process is also popular as the ‘project life cycle information.’ The technique is often called Facilities Management. Whenever a designer creates a model and updates it through the construction phase, the model acquires the capacity to become an ‘as-built’ model, for turning over to the owner. The as-built model contains all specifications, operation, and maintenance manuals as well as warranty information, suitable for future maintenance. Eradication of making O&M manual out-of-place or keeping it at a remote place facilitates the adoption of IOT-based data driven scheduing.

BIM software like BIM 360 entails capturing of data, where appropriate data is documented throughout the operation of a building. This process in turn aids BIM model to be used for assessing its energy efficacy, monitoring a building’s life cycle cost, and augmenting its cost-efficiency. 6D BIM not only helps in site safety,  with improved productivity but also helping in perfect decision making. This also empowers the owner to gauge the cost of any proposed upgrades.

 

What is ahead of BIM?

The digitization revolutionizing construction, architecture and engineering industry is beyond the expectation. But choosing BIM for small business or large businesses is evidentally beneficial. As Building Information Modeling techniques allows improved planning, designing, managing and constructing smart buildings for commercial , residential, healthcare, hospital, government sector. So why to be scared to adopt BIM Modeling? Choose the Best Experienced BIM Consulting Companies Near …and build designs with difference.

To know about BIM Future scenario for architecture, engineering and construction..Click Here..
BIM Building Information Modeling Service Providers in USA

 





     

     

    Plumbing drawings for prefabrication | mep drawings
    Architectural Services, BIM Facility Management, BIM Service, Blog, Construction Project, Construction Project Management Services

    BIM (Building Information Modeling) in Plumbing

    MEP BIM Modeling services in DC, MD, VA, Baltimore

    Initiating the construction project lifecycle from design to operation and then to maintenance through facility management Building Information Management is integral for construction. BIM supports design build solution through quantity estimation with 5D BIM modeling, clash coordination and 4D scheduling. Different BIM stages and level of Detailing involve diverse expertise in adopting the correct stage. 

    Implementing BIM (Building Information Modeling) techniques before the project commencement, facilitates MEP consultants, designers , structural engineers to make better decisions in the design building process. 

                                What is Plumbing System?

    Plumbing system is the entire set of pipe fittings and appliances used for water supply and drainage. There are different types of supply and drainage pipe system. Supply pipes also known as service pipes. They supply water from the main system to the house plumbing system. Whereas the drain pipes or water disposal pipes are placed in kitchen, bathroom etc to dispose the waste. 

    Benefit of MEP BIM in Plumbing Design

    BIM (Building Information Modeling) entails a collaboration of softwares like Autodesk Revit, Bentley, Vectorwoks for plumbing designs. 3D, 4D, 5D, 6D & 7D in a single unit with all activities associated with project completion can be accomplished easily. Using MEP BIM modeling services MEP engineers can perform time and cost estimation, visualization of design objectives, clash detection and facility management of a plant for mechanical, electrical and plumbing sector. BIM modelers who are planning, designing, constructing, operating and maintaining diverse physical infrastructures like water, gas and electricity. Plumbing system in building sector gets enhanced with BIM to meet the requisite of the building water supply and sanitation during the construction planning stage for the better maintenance of the system. 

     

    Applications of BIM in Plumbing Sector:

    • 3D Collaborative BIM Design:

    BIM helps in creating 3D BIM Services model for water supply & drainage design. The design information contain all data associated with water supply and drainage like pipe size, material & type including soil pipe, cold pipe, slope and pump power. The 3D BIM model can be updated automatically. If changes are made in one view, those can be automatically updated in all views. BIM (Building Information Modeling) in Plumbing provides the opportunity to all the AEC professionals to work simultaneously through a central system, thus reducing coordination issues and improving the workflow efficacy.

    • Design Build Optimization:

    Design Optimization through BIM facilitates in resolving the problems involved in the traditional design. 3D BIM Services information data can be transmitted by the intuitive BIM technology to achieve good transmission. In case of a certain degree of difference in the model design, the model can be divided on the basis of the floor, and the building water supply & drainage design can be based as per civil and architectural engineering designs. Using BIM technology, the other data can be automatically updated, and the system can be controlled in a convenient way.

    • Pipe Designing:

    Water supply & drainage lines can be also be created easily with BIM technology. The software application takes care of all the pipe fittings such as the tees and elbows according to the pipe network. The pipe slopes can be drawn as per specific inputs, mechanically analyzing the level, and hence time can be saved, compared to the 2D drawing and 3D BIM Services, calculating the slope and indicating the level. BIM also helps in assigning pipes with the right color codes in the application, eliminating any incorrect pipe routing like placing of supply pipe instead of drainage pipe, leading to errors in quantification.

    • Parametric Revit Families:

    BIM includes readymade parametric families such as water tank, urinals, and water closet and other information such as inlet as well as outlet dia, of pipe, pressure loss methodology and flow rate. The size and the dia of the pipe can be customized. Using 3D BIM Revit Parametric Model, a beginner can start designing easily and detect the clashes at an earlier stage. The BIM application can also generate pressure loss reports, reducing the pressures at fittings owing to the coarseness of the material or other reasons.

    • BIM Clash Detection:

    Details of the clash report can be produced through BIM, after completion of all services in Navis Works. MEP professionals can know the location with the grid coordinates through complete design and attach every point for design visualization at site. Clash free drawings produced from the 3D BIM Model help to reduce space constraints. Further, BIM helps in generating the reports and making changes to the model to make it clash free.

    • 4D BIM Scheduling

    Time estimation & scheduling is another positive aspect of BIM, which helps in providing time estimation for the installation of plumbing service of the project, fed with the activities of the work to be done. The report can be connected in Navis Works and the scheduling of the work to be executed can be prepared.

    • 5D BIM Cost Estimation

    The 5D BIM Model contains detailed information to execute the essential task as per the budgeting. To estimate the project budget, the cost estimation can be made based on the selected material and products. This helps to generate the cost estimation for the piping & pipe fitting. With a single click, quantities can be generated and the cost can be applied for the quantities, giving accurate estimation.

    • 7D BIM Facility & Asset Management

    With a single click on the equipment in the 7D BIM Model, information related to the Plumbing Operation & Maintenance, can be obtained and the schedule of the maintenance& activities can be executed with the selected equipment. However, there should be a steady up-gradation of information about the condition of the system or equipment by the maintenance person into the application. 

    So, Building Information Modeling has several advantages in designing and maintenance of Plumbing systems. Implement BIM in your construction workflow from the best BIM Service Provider and get an edge over your competitors. Get in touch with Tejjy Inc. for BIM (Building Information Modeling) in Plumbing at 202-465-4830 or info@tejjy.com for discussing your construction project requirements.

    3D BIM Modeling Companies in houston
    3D Modeling Services, Architectural Services, BIM Service, Blog, Construction Project, Revit BIM Modeling Services

    Construction Engineering Design Optimization with 3D BIM

    3D BIM for construction engineering

    Today, with a complex construction project, the need for Construction Engineering Design Optimization is increasing in demand. The effective and accurate coordination and interaction with 3D BIM (Building Information Modeling)model for design build services help to avoid inefficiency in production and reduced construction rework, cost & wastage. Intelligent 3D BIM Modeling services deliver AEC professionals the insight to design, construct and manage buildings in an improved way.

    BIM Engineering Design Tools For Construction

    BIM Engineering companies has brought a revolution in the field of construction after 2D CAD technology. Construction projects can be designed, built, and managed with digital model. Best 3D BIM Modeling service companies aim at managing problems of construction design build firms through improved information technology and information management of the design and boost the key competitiveness of design enterprise. It also plays a constructive role in the advancement of BIM.

    3D Modeling Improves Building Design Management 

    Nowadays best construction firms are using building information management systems as tools in construction management throughout project lifecycle. The  building information has data accumulation with time about productive elements like labor, machine and material and encompassing managerial subjects like schedule, cost and quality.  To facilitate information resources, a conceptual framework is used for reusing the information resources based on 3D BIM Modeling service technology for extracting information resources per project and managing them in the standard format.

    Phases of Construction Design Build framework 

    • Extraction
    • Standardization
    • Management
    • Detailed Analysis of Information Resources

    Reuse of Information in Construction

    • Information resources reuse system called Info Reuse in construction firm gets developed, where the object-oriented database and programming methodologies are taken into consideration.
    • Information resources could be managed and retrieved in the system and the technique acts as a multi regression algorithm for applying to analyze the building information.
    • The system when applied in construction using real information resources to verify the feasibility and effectiveness, resulted in the organization of information resources and representation through standard BIM data, providing a solution to construction firms for significant decision-making.

     

    BIM for Construction Process Simulation 

     

    • BIM can be used for design building support. Based on the two-dimensional drawing, 3D BIM Modeling service can be created for structural, mechanical & electrical services for collision check.
    • 3D virtual constructions through the BIM model can be used to assist the design and construction.
    • The BIM model can also be saved for the operation & maintenance at a later time.
    • A collision can be detected in the schematic diagram for the 3D BIM Model on the computer in advance.

     

    Design Collaboration with AEC Project Stakeholders

     

    • A building model can be created with a large number of pipelines, components and equipment. 
    • The 3D model is designed by various project stakeholders, leading to interference and collision checking among the AEC professionals before the construction.
    • The team members involved in the project can find out the problem and can tag the collision point.
    • A design request can be put forward through the owner party to revise the design of a unit, avoiding cost during midway because of design change.

     

    For accurate BIM Construction Engineering Design Services , opt for Tejjy Inc. design build services – a BIM, Construction Management, Permit Expedition, and Architectural & Engineering Service Provider in Washington DC, Baltimore, Maryland, Virginia & other areas in the USA. 

    Structural BIM Engineers in US | BIM engineers
    3D Modeling Services, BIM Service, Blog, Engineering Services, Structural Design, Structural Engineering Services

    How BIM is Transforming Structural Engineering Companies?

    Planning and design coordination are the keys to successful project execution in for construction companies. BIM VDC technology allows project stakeholders to create and examine virtual representations of the Architectural, Structural engineering, MEP as well as other utilities. The bim vdc construction adopts bim 3d model for creating accurate shop drawings services and addressing design issues before construction. Developments in 3D BIM Modeling technology together with the onset of BIM have also transformed the Architectural, Engineering & Construction industry. With a deep understanding of international building codes & processes, BIM Modelers can recognize the significance of effective work process management.

    structural engineering companies near me, structural engineers maryland

    What are BIM Benefits for Structural Engineers?

    With structural engineers in DC, Houston Construction clients have reported 15% cost savings with BIM technology design collaboration. The entire construction lifecycle management for both commercial structural engineering projects and residential engineering projects are at benefit. The fact is that whether it is conversion from 2d drawings to 3d model , shop drawings, cost estimation or scheduling of activities BIM balances all stakeholders. The real power of design coordination and collaboration is the success key for structural engineering companies in usa.

    Few of the benefits that are silver lining for structural engineers responsibilities are:

    • VDC: visualization companies in collaboration with structural engineers are able to streamline communication. 3D visualization , BIM with VR virtual reality, augmented reality has taken visualization to one stage up before actual construction. Benefit of vdc is customer satisfaction .
    • Efficiency: Elimination of RFI’s, work stoppage & rework by checking accuracy & completeness of drawings before construction on-site and off-site.
    • Quality: Enhanced Quality by producing accurate drawings from the 3D BIM model.
    • Savings: With 5d bim modeling surveyors and estimators perform cost estimation as well as cost monitoring. The digitized platform maintains the consistency of information during change management in a design build process. Quantity take off helps structural engineers in maryland and in construction industry to evaluate resource utilization. 
    • Project Management: Material quantity & shop drawings with 3D Visualization enabling a better look at the project, facilitating review, scheduling & project monitoring.

    Process of  BIM Structural Engineering Execution

    • Structural engineers provide accurate, reliable & cost-effective BIM solutions for Structural Engineering services.
    • The Engineers create virtual 3D BIM modeling using a wide array of inputs such as contract documents, sketches & design documents.
    • During the Modeling, the Structural Engineers validate the design for constructability, performance & maintenance of various structures like the wood, steel & concrete structures including column, structural openings, beam depths & clashes.
    • Through BIM Modeling, quality structural drawings are produced for the AEC industry.
    • A comprehensive analysis of the structural elements is undertaken for project delivery in a risk-free environment.

    How Structural Detailing Services helps Construction:

    From commercial structures including monuments, high rise building bim engineers in usa do get benefited while creating complex large commercial structures. Commercial structural engineering projects have created remarkable structures with bim design collaboration. From bridges to railway tracks, highway to roads , hospital to residential complexes structural engineering firms are able to succeed in every phase. 

    AutoCAD , Revit, Tekla are amongst the few best structural engineering softwares available

     BIM Services for Structural Engineering Firms?

    BIM Design Coordination:

    BIM Modelers have the competence and technology to assist Structural Engineering services in the design development stage.  The dedicated team of BIM Engineers interacts with structural clients to understand the design intent and provide value-added support with design evolution from the conceptual or schematic stage to the construction stage. Different types of input are used for structural engineer BIM design development & coordination such as the Conceptual Drawings, Hand-sketches, Mark-ups, Line Diagram as well as 2D Drawings.

    BIM Modeling Services

    3d bim model involves creation & usage of design coordinated 3D model. The building design are associated to an intelligent database for a building information. The technology, when applied to the Structural Engineering firm facilitates seamless collaboration, aiding quick decision making, accurate construction documents. Accurate BIM 3d model of wood, steel, concrete & pre-stressed & post-tensioned Structures are produced for the Structural Engineers from an approved set of structural drawings. BIM 3d modelling solutions are competently used for structural design, detailing & prefabrication. Working in BIM helps the structural Engineers to manage complex structural design projects,  including wood framing and modeling of Buildings, Tanks, Residential, Mixed-use & Pre Engineered Buildings.

    Construction Drawings

    Construction drawings provide a representation of a building with a sequential description of every phase including the floor plans, elevations, ceiling, and other detailed drawings. The drawings are essential for residential and commercial works such as the renovations or new structural additions. Assemblies and detailed construction drawings are used for wooden structures from the 3D BIM Models. Structural drawings delivered from bim 3d model includes rebar detailing / Post Tension Details, Concrete Drawings, Sections, Elevations of Wood Structure & Schedule including Column, Beam & Slab.

    Quantity Take-Off

    Quantities of all materials can been calculated through 5d bim quantity take off by surveyors accurately for Structural Engineering services. The quantities are automatically updated in case of a change made to the BIM model. BOM and estimation solutions for pre-construction, construction & coordination help to enhance productivity and execute constructability analysis.

    Hire a competent BIM consultant for Structural Engineering companies to plan, prepare and update your construction project schedules. BIM engineers can visualize the benefits of integrating BIM data with business functions like procurement, contract management, innovative document management, project cost control, project management, budget evaluation & project risk management. Call Tejjy Inc. BIM consultants  at 202-465-4830 or info@tejjy.com– A Construction Management, BIM Services, Engineering & Architectural Service Company in the USA and capitalize on project decision-making opportunities to improve facility design, construction & project life-cycle performance.

    Benefit of BIM services for construction manager
    BIM Service, Blog

    Role of a Competent BIM Manager for Reaping Full-Fledged BIM Benefits

    It is important to understand the work of a competent BIM manager. Professional design firms & construction sub-contractors can use BIM software application only if it can be managed efficiently. If Building Information Modeling is used properly, projects can be executed properly with the minimized error. However, if it is not managed in the right manner, the project team members will be stuck in a nightmare of monotonous tasks,  repetitive work, and redundant effort. This will subsequently result in missed deadlines, documentation errors, and dissatisfied clients.

    Role of a Competent BIM Manager for Reaping Full-Fledged BIM Benefits

    Let’s explore the role of a Competent BIM Manager:

    Activities in BIM Domain:

    • Manages technical teams & provides necessary project support
    • Assists construction project directors on technical delivery
    • Develops & manages BIM standards, protocols & templates
    • Consults with IT teams, systems administrators, clients & contractors
    • Provides BIM training to the junior members of the team

    Comprehensive Understanding of BIM:

    • Treats BIM model as a realistic depiction of the building
    • Leverages BIM models as a collaborative tool among the modelers, and the receivers of the model output
    • Recognizes BIM models to be a creation of a team of people, and not as an individual task

    Team Configuration for Leveraging BIM

    • Ensures that none works in a silo
    • Sets the team roles as per responsibility and not as per tasks
    • Enforces people to take project ownership, making them responsible for complete work (for instance a person accountable for modeling walls also has to take the responsibility for wall tagging, details & schedules)

    Realistic Approach to BIM Workforce

    • Customizes work practices to the abilities of the people working
      (Should not make someone responsible for facades if they struggle with simple tasks of wall creation)
    • Shouldn’t let designers use specific architectural software if it makes their task of designing, less effective
      (Getting designers to provide hand-drawn sketches to the modeling experts is usually more effective than getting the designers to model properly)
    • Never think that training is merely the solution

    Flexible Working Methodology

    • Retains a flexible workflow for accommodating unusual condition & innovative work practices
    • Never enforce a “universal standards”, which is imperfect, as it is hard to forecast every possible permutation of what needs to be created on every project
    • Supports various work practices based on the intricacy of the project and the ability of the staff working on it

    Involvement in Real BIM Projects

    • Maintains an intimate knowledge of how the BIM office operates through active project engagement
    • Engages in setting up of every project in the office
    • Audits projects periodically
    • Steps in whenever required to assist others but not work full time on a single project

    Capability to Question Specific Requests instead of Reacting

    • Evaluates a request against the real-world consequence, it is trying to achieve
    • Delivers a workflow & work methodology based solution& not just technical solutions
    • Gauges how long a request takes to provide the result
    • Suggests alternatives for obtaining the same consequence

    Proactivity with BIM

    • Uses new BIM software functionality for augmenting problem-solving & service delivery methodologies
    • Provides courageous advice, but accepts that their views may not always be implemented
    • Listens to other project team members who may provide improved ideas
    • Involves themselves in industry-wide BIM concerns


    Unfortunately, all AEC firms don’t understand the need to hire a competent BIM manager, nor do they understand the benefits that a competent BIM manager can bring. Often a graduate who has used BIM software in his course is bestowed the responsibility of a BIM manager. It’s no doubt that these people can become good BIM managers in due course of time with experience. However, if they don’t have any understanding of the profession they will not be able to work in the core BIM areas. All AEC professionals need to understand the fact that the benefits of BIM don’t occur by themselves. Just like any other process, Building Information Modeling should be rightly managed and implemented. It is only then that the project stakeholders can reap the benefits of BIM.

    Appoint a skilled BIM Manager from Tejjy Inc.– a BIM, Engineering, Construction Management, Permit Expedition & Architectural Services Company in DC, VA, MD & Baltimore areas in the USA and step into the world of intelligence working. To know more, call at 202-465-4830 or info@tejjy.com.

    Architectural-BIM-Services-for-Construction-Project-Lifecycle
    3D Modeling Services, Architectural Services, BIM Facility Management, BIM Service, Blog, Construction Management, Construction Project, Construction Project Management Services, Engineering Services, Revit BIM Modeling Services

    Architectural BIM Services for Construction Project Lifecycle

    Architectural BIM Services for Construction Project Lifecycle

    Architects are the connoisseurs who bring life to the concept of a construction project. They constitute being a vital part of architectural project planning and execution. BIM Service companies act as a support to architects and engineers in their design development process. Architectural Revit Services is a great mode of this collaborative and innovative solution. 3D BIM models use inputs, such as the construction & design documents as well as hand sketches. The team of BIM professionals creates the final model after resolving potential construction problems through raising RFIs (Request for Information) and checking with architects and other project consultants.

    How BIM facilitates Architects in Design Development?

    BIM supports architects in the various stages of design development through conceptual, schematic & detailed designs, as well as construction documentation with the help of 3D Modeling. Architects are able to create the interior design for the renovation and new building creation. BIM also provides virtual mock-ups of building components and creates a comprehensive 360-degree view of the projected building. 

    BIM Supporting Various Stages of Construction Project Lifecycle

    • Conceptual Designing: Architectural BIM Modeling provides an edge to the whole design process. BIM is used for creating manifold design routes for presentation with variations in layout and space planning. 3D Rendering Services Models with diverse colors and material specifications provide a realistic feel to the virtual building structure. During the concept designing stage, the design of the projected building structure is created using Revit Models, focussing on the looks, behaviors, and structural properties. The stage can be related to the Revit LOD 100 Model including numerous elements as Masses, Conceptual Design & overall project phasing. Location & Orientation analysis can be executed at this stage and quantities based on overall area & volume can also be obtained.

    • Pre-Construction Phase: BIM experts can develop detailed and accurate Construction Drawing Services from Architectural 3D Model. The Revit parametric features presented in a BIM Model facilitates in accomplishing a high level of detailing with precision. Changes made in the plans automatically get reflected in all the associated areas of the sheets. 3D Model for BIM Coordination Services can then be used collaboratively, detecting the clashes before construction. This controls the construction cost by reducing design changes at the time of construction.

    • Construction Phase4D BIM Construction Sequencing and 5D BIM Costing facilitate the planning of the construction phase effectively, enabling on-site coordination with the aid of Architectural BIM Modeling. On-site changes can also be fixed as per the virtual BIM design model. The construction design stage acts as a bridge between building design and physical building stages, encompassing the creation of drawings & specifications for the comprehensive requirements of a building project. The stage matches with LOD 400 Revit Model, comprising elements that are accurate in shape, size, location, quantity & orientation with complete fabrication, assembly, and detailed information.

    • Post Construction Phase: Architectural Modeling Services also help during the post-construction phase for presenting an as-built model that can be used later for the renovation and reconstruction of a building. BIM ensures methodical facility management using a comprehensive Architectural model encompassing various asset details.

    Prime Architectural BIM Services include:

    • BIM Consulting Services for seamless BIM applications
    • LOD Based BIM from a conceptual stage to a well-defined Facility Management model
    • Construction Documentation set of sequential drawings for construction management
    • BIM Design Development of BIM design build services
    • Custom Revit Family Creation Services for all building products
    • Point Cloud to BIM for renovation, retrofitting & as-built projects
    • Landscape BIM Models for creating & coordinating Landscape data
    • Underground Modeling  for improved visualization & clash detection
    • Architectural 3D Modeling to facilitate the design, planning & visualization
    • Procurement BIM through openly shared project models for lucrative project procurement
    • Architectural Detailing for transforming design into technical diagrams & plans
    • 4D Scheduling with data-rich 4D BIM models for early detection & resolution of conflicts
    • Infrastructure BIM Modeling to make civil projects resilient & productive
    • Modular BIM for prefabrication & modular building projects
    • Facility Management BIM to create, utilize & manage building information throughout the lifecycle of the structure
    • BIM for Energy Analysis with virtual 3D energy models

    Architectural Detailing Services across the Sectors:

    Residential, Hospital & Commercial Buildings:

    • Architectural Layouts & Floor Plans
    • Elevations & Sections
    • Door-window Details
    • Sanitation & Piping Plans
    • As-Built Drawings
    • Architectural Elevations & Sections
    • Ceiling & Foundation Plans
    Interior Decorations
    • Floor & Roof Framing Plans
    • Building Sections
    • Interior & Exterior Designs & Plans
    • Furniture Layouts
    Urban Planning
    • Building Block Detailing or Drafting
    • Landscape Drafting with BIM
    • Contour Mapping
    • Drawing development
    • Site Plan Drawings

    BIM software applications used for Architects

    • AutoCAD
    • 3DS Max
    • Photoshop
    • Illustrator
    • SketchUp
    • Revit Software Suite
    • MicroStation
    • Navisworks
    • Bluebeam
    • Civil 3D
    • BIM 360 Glue

    To know more about Architectural BIM services in Washington DC, Baltimore, MD & Virginia areas in the USA consult the BIM experts of Tejjy Inc. at 202-465-4850 or info@tejjy.com.